1. ข้อมูลพื้นฐานของผลิตภัณฑ์

คำถามที่ 1: What is the AS-303S Peeling Machine?

A1: The AS-303S Peeling Machine is an edge thinning machine designed for high-end leather goods, leather, EVA sponge, rubber and other materials. It uses advanced technology with an accuracy of up to 0.01mm, and the edge trimming effect is uniform and smooth with excellent quality. The bevel and angle of the material can be easily adjusted through the feeding wheel to achieve precise edge trimming operation; the maximum width of the flat edge trimming is 50mm, and the replacement of different specifications of presser feet can meet various trimming needs. Equipped with an electronic servo motor, it supports speed adjustment, runs quietly and energy-saving, and is equipped with a high-power, low-noise Vacuum Dust Collector, strong suction, greatly improving the sanitary environment of the production site. It also supports automatic mode and foot mode, and you can freely choose the operation mode according to actual needs.

คำถามที่ 2: What is the AS-303S used for?

A2: It is mainly used for edge thinning of high-end leather goods, leather, EVA sponge, rubber and other materials. Specific functions include:

1. Thinning leather edges to make them flat.

2. Thinning and beveling EVA sponge.

3. Edge thinning of rubber materials.

4. Adjusting the bevel and angle of the material through the feeding wheel to achieve precise edge trimming.

5. Maximum width of flat edge trimming reaches 50mm.

6. Replacing different specifications of presser feet to meet various trimming needs.

7. มาพร้อมกับ Vacuum Dust Collector to improve the sanitary environment of the production site.

คำถามที่ 3: What are the key technical parameters of the AS-303S?

A3:Key technical parameters of the AS-303S are as follows:

1. Model No.: AS-303S

2. แรงดันไฟฟ้า: 220V

3. กำลังมอเตอร์หลัก: 750W

4. พลังของแฟนๆ: 250W

5. Blade Speed: 1000–1800rpm

6. Fan Speed: 2400 รอบต่อนาที

7. ขนาดเครื่อง: 1200×600×1220mm

8. น้ำหนักสุทธิ: 101 กิโลกรัม

Supplementary parameters from the manual:

1. Dimensions: 450(W)×380(H)×340(D) mm

2. Motor capacity: 200–400W

3. Knife speed: 1,000–1,200 rpm

4. น้ำหนัก: 37.4 kgf

The voltage affects the usable region, main motor power and blade speed affect cutting capability, fan power and speed affect dust collection effect, and size and weight affect installation space and handling.

คำถามที่ 4:What are the main features of the AS-303S?

A4:Main features include:

1. Precise adjustment and flexible operation: The bevel and angle of the material can be easily adjusted through the feeding wheel to achieve precise edge trimming operation; the maximum width of the flat edge trimming is 50mm, and the replacement of different specifications of presser feet can meet various trimming needs. One machine can easily handle the edge trimming tasks of different products.

2. Excellent configuration and outstanding performance: Equipped with an electronic servo motor, it supports speed adjustment, runs quietly and energy-saving, providing you with an efficient and low-consumption edge trimming experience.

3. Clean and environmentally friendly: Equipped with a high-power, low-noise Vacuum Dust Collector, strong suction, greatly improving the sanitary environment of the production site.

4. Multiple modes: Support automatic mode and foot mode, freely choose the operation mode according to actual needs, and make work more efficient and convenient.

5. High-precision edge trimming: Accuracy up to 0.01mm, uniform and smooth edge trimming effect with excellent quality.

2. อุตสาหกรรมและวัสดุที่เหมาะสำหรับการใช้งาน

คำถามที่ 5: What materials can the AS-303S process?

A5:The AS-303S is suitable for the following materials:

1. High-end leather goods

2. หนัง

3. EVA sponge

4. ยาง

5. Other materials requiring edge thinning

The machine can perform edge thinning on these materials, with uniform and smooth edge trimming effect and excellent quality.

คำถามที่ 6:What industries or factories use the AS-303S?

A6:It is widely used in the following industries:

1. High-end leather goods factories

2. Leather products factories

3. Shoe factories

4. Bag factories

5. EVA sponge processing factories

6. Rubber products factories

And other manufacturers requiring edge thinning.

คำถามที่ 7: What products is the AS-303S suitable for?

A7:Suitable for the following products:

1. High-end leather goods

2. Leather products

3. Footwear

4. Bags

5. EVA sponge products

6. ผลิตภัณฑ์จากยาง

By replacing different specifications of presser feet, various trimming needs can be met.

三. Functions & Performance

คำถามที่ 8:What is the edge trimming accuracy of the AS-303S?

A8: The edge trimming accuracy of the AS-303S is up to 0.01mm, with a uniform and smooth edge trimming effect and excellent quality. This accuracy can meet the processing needs of high-end leather goods, leather and other products with high edge quality requirements.

คำถามที่ 9:  What is the maximum edge trimming width of the AS-303S?

A9:The maximum width of flat edge trimming of the AS-303S is 50mm. Replacing different specifications of presser feet can meet various trimming needs, and one machine can easily handle the edge trimming tasks of different products.

คำถามที่ 10: What is the function of the electronic servo motor on the AS-303S?

A10:The AS-303S is equipped with an electronic servo motor. Main functions include:

1. Supports speed adjustment.

2. Runs quietly.

3. Energy-saving.

4. Provides an efficient and low-consumption edge trimming experience.

5. Ensures a stable and reliable edge trimming process.

คำถามที่ 11: What is the function of the Vacuum Dust Collector on the AS-303S?

A11:The AS-303S is equipped with a high-power, low-noise Vacuum Dust Collector. Main functions include:

1. Strong suction.

2. Greatly improves the sanitary environment of the production site.

3. Reduces dust damage to equipment.

4. Extends equipment service life.

5. Makes operation more convenient and efficient.

คำถามที่ 12: What operation modes does the AS-303S support?

A12:The AS-303S supports the following operation modes:

1. Automatic mode.

2. Foot mode.

You can freely choose the operation mode according to actual needs, making work more efficient and convenient.

四.Installation & Commissioning

คำถามที่ 13: What should be noted during AS-303S installation?

A13:Installation notes include:

1. The hinge at the rear of the machine is fixed with screws.

2. Drill a hole of about 170mm×150mm under the bell shaped knife so that scrap falls through the hole.

3. When a motor is directly connected to the machine, a space of more than 300mm is provided between the machine pulley and that of the motor.

4. The motor is installed so that its pulley becomes parallel with the machine’s pulley.

5. A V pulley of 50mm to 60mm must be used for the motor.

คำถามที่ 14: What is the rotation direction of the AS-303S?

A14:The machine should rotate clockwise when viewed from its right hand side.

五.Lubrication & Maintenance

คำถามที่ 15:What are the lubrication requirements for the AS-303S?

A15:Lubrication requirements are as follows:

1. Before the machine is put into operation, antitrust oil coated on the plated parts must be thoroughly wiped away with a piece of dry cloth so that a work piece is not smudged with oil.

2. If the bell shaped knife is smudged with oil, it cannot be ground as oil adheres to an emery wheel.

3. Before operating the machine, be sure to supply machine oil to those portions marked with (Δ).

4. Supply a mixture of machine oil and grease to the portion marked with (Δ).

六.Presser Feet & Accessories

คำถามที่ 16: What special presser feet are available for the AS-303S?

A16:When a work piece is to be skived into a special shape, one of the following type presser feet should be used:

1. 116 presser foot

2. 112 presser foot

3. 120 presser foot

4. 121 presser foot

5. 513 presser foot

6. 526(Rubber) presser foot

คำถามที่ 17:  What special roller presser feet are available for the AS-303S?

A17:A roller presser foot must be used for a thick or hard work piece of special shape, including:

1. 131

2. 132

3. 133

4. 134

5. 135

6. 118

7. 119

8. 531

9. 532

คำถามที่ 18:What accessories are included with the AS-303S?

A18:Accessories attached include:

1. 114 Presser foot

2. 115 Presser foot

3. 116 Presser foot

4. 601 Guide

5. 602 Knurled screw for guide

6. 801 Emery wheel dressing tool

7. 802 Oil stone

8. 803 Tool for removing disc

9. 805 Spanner for emery wheel

10. 17mm Spanner

11. Oil can

12. Screw driver

13. Socket wrench (4,5,6mm)

七.Troubleshooting

Q19:What to do if the emery wheel grinds the bell shaped knife but the edge is not sharpened well on the AS-303S?

A19:Possible causes and solutions are as follows:

1. Oil adheres to the emery wheel: Wipe away oil from the wheel completely.

2. The emery wheel is clogged with iron powders: Rotate the wheel and apply the dresser to the wheel.

八. Selection & After-sales

Q20:How to choose the AS-303S Peeling Machine?

A20:Choose based on the following factors:

1. Actual production needs: Confirm whether edge thinning functions are needed.

2. Processing materials: Confirm whether they are high-end leather goods, leather, EVA sponge, rubber, etc.

3. Edge trimming accuracy: Confirm whether 0.01mm meets process requirements.

4. Edge trimming width: Confirm whether 50 มิลลิเมตร meets the maximum edge trimming width requirement.

5. Power conditions: Confirm whether the factory has 220V power.

6. Installation space: Confirm whether 1200×600×1220mm can be placed.

7. Operation modes: Confirm whether automatic mode and foot mode are needed.

8. Dust collection requirements: Confirm whether the Vacuum Dust Collector air volume and interface size meet workshop requirements.

9. After-sales support: Confirm whether the manufacturer provides installation guidance, operation training and after-sales service.

Q21:What should I consider when buying the AS-303

A21:Buyers should consider the following factors:

1. Power and power supply: Confirm whether 220V and 750W main motor power, 250W fan power are available.

2. Edge trimming accuracy: Whether 0.01mm meets process requirements.

3. Edge trimming width: Whether 50 มิลลิเมตร meets the maximum edge trimming width requirement.

4. Blade speed: Whether 1000–1800rpm meets process requirements.

5. Machine size: Whether 1200×600×1220mm fits the installation space.

6. Machine weight: Whether 101 กิโลกรัม requires consideration for handling and load-bearing.

7. Presser foot specifications: Confirm whether the required presser feet are easy to purchase.

8. Spare parts availability: Confirm supply of emery wheel, belt, presser foot and other consumables.

9. After-sales support: Confirm installation guidance, operation training and after-sales service.

10. Delivery time and warranty period: Confirm delivery time and warranty policy.

Q22:Can the AS-303S be customized?

A22:Customization can be confirmed with the manufacturer according to actual requirements. Possible customization directions include:

1. Working voltage

2. Power interface

3. Presser foot specifications

4. Dust collection interface size

5. Blade speed range

6. Appearance color

Before customization, clarify production needs, material types, edge trimming accuracy requirements, edge trimming width requirements and installation space so the manufacturer can

Q23:Does the manufacturer provide installation and technical support?

A23:The manufacturer can provide the following services:

1. Installation guidance

2. Commissioning support

3. Operation training

4. บริการหลังการขาย

5. Spare parts supply

Specific service scope depends on order and region. Please confirm with the supplier before purchase. It is recommended to clarify installation, training, warranty and spare parts supply in the purchase contract.