{"id":12044,"date":"2026-09-24T07:25:14","date_gmt":"2026-09-24T07:25:14","guid":{"rendered":"https:\/\/asfrom.com\/?p=12044"},"modified":"2026-09-24T07:25:14","modified_gmt":"2026-09-24T07:25:14","slug":"asfrom-swing-arm-cutting-machine-faq","status":"publish","type":"post","link":"https:\/\/asfrom.com\/vi\/asfrom-swing-arm-cutting-machine-faq\/","title":{"rendered":"ASFROM Swing Arm Cutting Machine FAQ"},"content":{"rendered":"

Swing Arm Cutting Machine Base Q&A<\/span><\/p><\/h1><\/div>

I. Th\u00f4ng tin c\u01a1 b\u1ea3n v\u1ec1 s\u1ea3n ph\u1ea9m<\/strong><\/span><\/p>\n<\/div>

C\u00e2u h\u1ecfi 1: What is AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/span><\/strong><\/p>\n

A1:AFC\u2011622 Hydraulic Swing Arm Cutting Machine is a compact 22\u2011ton swing\u2011arm hydraulic cutting machine. The swing\u2011arm can swing freely for small\u2011size forming dies. It supports dual\u2011cutting\u2011modes: time\u2011mode and pressure\u2011mode. Equipped with innovative silent hydraulic system, 0.75KW low\u2011power energy\u2011saving motor with motor\u2011protection device and heavy\u2011duty hand\u2011press switch. Compact footprint and low failure rate. Widely used for blanking small non\u2011metallic parts in shoe, leather\u2011goods and luggage factories. Up\u2011stream connects skiving and laminating machines, cut parts go to edge\u2011folding and inspection stations.
\nExtension: Model comparison
\n\u2011 AFC\u2011622:22T swing\u2011arm type, small footprint, for small\u2011size dies & small parts.
\n\u2011 AFC\u2011525:25T flat\u2011bed, dedicated for shoe midsole & outsole.
\n\u2011 AFC\u2011525A:25T flat\u2011bed universal model for shoe\u2011material & leather\u2011goods with large worktable.
\n\u2011 AFC\u2011780:80T four\u2011column heavy\u2011duty for thick multi\u2011layer heavy\u2011load cutting.<\/p>\n<\/div>

Q2: What are the core technical parameters of AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A2:<\/p>\n

1.Model No.: AFC\u2011622
\n2.Max cutting force: 22T
\n3.Cutting stroke:70mm
\n4.Motor power:1HP \/ 0.75KW
\n5.Worktable dimension:900\u00d7430mm
\n6.Swing\u2011arm effective size:370\u00d7490mm
\n7.Hydraulic oil filling quantity:30Kg
\n8.Machine dimension:900\u00d7870\u00d71450mm
\n9.Packing size:950\u00d7940\u00d71500mm
\n10.N.W:660kg\uff1bG.W:745kg
\nExtension: Avoid continuous full\u201122\u2011ton operation which accelerates cylinder seal aging. Die size cannot exceed swing\u2011arm effective area 370\u00d7490mm.<\/span><\/p>\n<\/div>

Q3: What are the main features of AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A3:<\/p>\n

1.Innovative high\u2011efficiency silent hydraulic system: fast operation, low noise and stable oil temperature.
\n2.Specially\u2011processed hand\u2011press switch, durable under frequent pressing with long service life.
\n3.0.75KW low\u2011power motor for energy saving, built\u2011in motor\u2011protection device for overload protection.
\n4.Light\u2011weight flexible swing\u2011arm structure, easy operation, stable performance and low failure rate.
\n5.Dual cutting\u2011modes: time\u2011mode and pressure\u2011mode selectable, precise control for stroke & cutting parameters.
\nExtension: Optimized for small\u2011size dies. Large dies are limited by swing\u2011arm dimension. Pressure\u2011mode is recommended for material with thickness variation; time\u2011mode for material with stable thickness.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

<\/span><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div>

II. C\u00e1c ng\u00e0nh c\u00f4ng nghi\u1ec7p v\u00e0 v\u1eadt li\u1ec7u \u00e1p d\u1ee5ng<\/strong><\/span><\/p>\n<\/div>

Q4:What products and materials can AFC\u2011622 Hydraulic Swing Arm Cutting Machine process?<\/span><\/strong><\/p>\n

A4:Applied in shoe factories, leather\u2011goods factories and luggage factories. Use forming dies for blanking & cutting of various non\u2011metallic flexible materials, suitable for small shoe\u2011material accessories, leather parts and small luggage components.
\nExtension: Only for non\u2011metallic flexible materials. Die size shall not exceed swing\u2011arm effective area 370\u00d7490mm. Do not stack excessive layers to avoid incomplete cutting on bottom layer. Not for large\u2011size & wide\u2011format workpieces.<\/p>\n<\/div>

Q5: What production scenarios is AFC\u2011622 Hydraulic Swing Arm Cutting Machine mainly used for?<\/span><\/strong><\/p>\n

A5:Used in shoe\u2011making, leather\u2011goods and luggage processing factories for small\u2011accessory die\u2011cutting. Up\u2011stream connects skiving machine and laminator. Cut semi\u2011finished parts go to edge\u2011folding and inspection process.
\nExtension: Suitable for small\u2011medium\u2011batch small\u2011size parts, convenient for sampling. Not suitable for mass\u2011production of large\u2011size workpieces.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

\u4e09. Utility, Installation & Commissioning<\/strong><\/span><\/p>\n<\/div>

Q6: What utility conditions are required for AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A6:Power supply: three\u2011phase power, reliable protective earthing is mandatory. No compressed\u2011air source required. Floor load\u2011bearing \u2265745kg. Keep workshop ventilated; keep hydraulic oil away from open fire. Reserve space for swing\u2011arm moving radius, die handling and maintenance.
\nExtension: Although machine footprint is small, keep surrounding area clear for swing\u2011arm motion. Hydraulic oil is flammable; basic fire\u2011fighting equipment shall be equipped.<\/p>\n<\/div>

Q7:What are requirements for installation & placement of AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A7:Place machine on flat hard load\u2011bearing floor and level whole unit. Reserve clearance for swing\u2011arm left\u2011right movement. No obstacles above worktable. Keep away from high\u2011temperature heat source and open fire.
\nExtension: Reserve operation space at front and side. Do not stack materials to block swing\u2011arm movement.<\/span><\/p>\n<\/div>

Q8:What is complete test\u2011running operating procedure for AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A8:<\/p>\n

1.Confirm reliable power earthing; clean oil tank and fill 30Kg hydraulic oil. Verify motor oil\u2011pump rotation matches arrow marking; level whole machine.
\n2.Clean worktable, place forming die. Manually swing arm to align ram center with die center.
\nExtension: Never place hands under swing\u2011arm ram during swing\u2011arm movement.
\n3.Select cutting\u2011mode according to material condition: pressure\u2011mode for material with thickness fluctuation; time\u2011mode for material with stable thickness, set corresponding process parameters.
\n4.Load stacked material, press hand\u2011switch for trial\u2011cut. Check whether sample is fully cut\u2011through and dimension is qualified.
\n5.Fine\u2011tune pressure \/ time parameters. Start mass\u2011production only after sample acceptance.
\n6.Monitor oil temperature and noise during production; stop machine immediately for abnormality.
\n7.Maintenance procedure: Cut off main power; wait hydraulic\u2011system fully cool\u2011down; place support block under swing\u2011arm ram before repairing.<\/p>\n<\/div>

Q9: What precautions for time\u2011mode and pressure\u2011mode selection?<\/span><\/strong><\/p>\n

A9:Pressure\u2011mode: cutting completes once preset pressure is reached, suitable for material with thickness fluctuation to guarantee consistent cutting force for each stroke. Time\u2011mode: fixed down\u2011stroke duration, for material with very stable thickness. Re\u2011adjust mode & parameters after die or material change; old parameters cannot be reused directly.
\nExtension: Die dimension must be within swing\u2011arm effective area 370\u00d7490mm. Over\u2011size die causes eccentric load and damages swing\u2011arm & oil\u2011cylinder.<\/p>\n<\/div>

<\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>

IV. C\u1ea5u t\u1ea1o v\u00e0 c\u00e1c b\u1ed9 ph\u1eadn c\u1ee7a m\u00e1y<\/strong><\/span><\/p>\n<\/div>

Q10: What are the 5 core assemblies of AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A10:<\/p>\n

5 modular core assemblies:
\n1.Machine frame & worktable assembly; 2.Swing\u2011arm hydraulic actuator unit; 3.Hydraulic pump & oil\u2011circuit assembly; 4.Hand\u2011press\u2011switch operation unit; 5.Electrical motor\u2011protection control system.
\n\u2011Machine frame & worktable assembly: base frame, worktable.
\n\u2011Swing\u2011arm hydraulic actuator unit: movable swing\u2011arm, oil\u2011cylinder ram assembly.
\n\u2011Hydraulic pump & oil\u2011circuit assembly: oil pump, oil tank, solenoid valve, pressure\u2011regulating valve, oil pipes, oil\u2011seal sealing parts.
\n\u2011Hand\u2011press\u2011switch operation unit: fatigue\u2011resistant hand\u2011press switch.
\n\u2011Electrical motor\u2011protection control system: electric\u2011control box, motor overload\u2011protection device.
\nExtension: Wearing\u2011parts list: hand\u2011press switch, cylinder oil\u2011seal & O\u2011ring, high\u2011pressure oil pipe. Spare\u2011part stock is recommended to reduce downtime.<\/p>\n<\/div>

Q11:What are respective functions of pressure\u2011mode and time\u2011mode?<\/span><\/strong><\/p>\n

A11:Pressure\u2011mode: Cutting finishes once preset cutting\u2011pressure is reached. It keeps stable actual cutting\u2011force even under material thickness fluctuation. Time\u2011mode: Fixed down\u2011stroke time, stroke controlled by timing, for material with uniform & stable thickness.<\/p>\n<\/div>

Q12: What is the function of swing\u2011arm mechanism?<\/span><\/span><\/strong><\/p>\n

A12:Swing\u2011arm can swing left\u2011right with movable ram. It facilitates die change and material loading for operator, performing blanking with small\u2011size forming dies.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

\u4e94.Safety, Maintenance & Troubleshooting<\/strong><\/span><\/p>\n<\/div>

Q13: What safety notes for AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A13:<\/p>\n

1.Machine must be reliably earthed for three\u2011phase power supply against electric\u2011shock hazard.
\n2.Keep hands away from under ram during swing\u2011arm movement & ram downward stroke to avoid crush injury.
\n3.For maintenance & die replacement: cut off main power; wait for hydraulic\u2011cylinder full cooling; place solid support block under swing\u2011arm ram.
\n4.Do not remove protective covers. Operators must receive professional training.
\n5.Stop machine for troubleshooting in case of oil leakage; do not run machine with fault.
\nExtension: Do not place any body\u2011part within swing\u2011arm moving trajectory during operation.<\/p>\n<\/div>

Q14: What is maintenance schedule for AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

A14:Per shift: Clean debris on worktable; test hand\u2011press\u2011switch function; inspect hydraulic oil leakage; monitor noise and oil temperature.
\nWeekly: Inspect oil\u2011pipe joints and cylinder oil\u2011seal for leakage; check smooth swing\u2011arm movement; tighten fasteners.
\nEvery half\u2011year: Fasten all electrical terminals; check motor\u2011protection device and solenoid\u2011valve performance.
\nYearly: Replace hydraulic oil and clean oil\u2011tank & filter; complete\u2011machine overhaul. Evaluate wear of oil\u2011cylinder, oil\u2011pump and sealing\u2011parts; replace aged & worn spare\u2011parts.
\nExtension: For long\u2011term shutdown, lower swing\u2011arm ram to low\u2011position and apply dust\u2011proof protection.<\/p>\n<\/div>

Q15: Common faults and troubleshooting guidelines?<\/span><\/strong><\/p>\n

A15:<\/p>\n

    \n
  1. Incomplete cutting: Verify pressure\u2011mode \/ time\u2011mode parameters; check die sharpness; excessive stacked layers; insufficient oil\u2011level or clogged oil filter.<\/li>\n
  2. No action after pressing hand\u2011switch: Inspect switch wiring; hand\u2011switch worn\u2011out (high\u2011frequency wearing part).<\/li>\n
  3. Loud noise & fast oil\u2011temperature rise: Deteriorated hydraulic oil; clogged filter causing insufficient oil suction; air entering oil\u2011circuit.<\/li>\n
  4. Insufficient cutting pressure: Low pressure setting; aged cylinder seals; worn oil\u2011pump.<\/li>\n
  5. Hydraulic oil leakage: Aged cylinder oil\u2011seal; loose oil\u2011pipe joints. Extension\u2011added frequent site faults:<\/li>\n
  6. Cutting\u2011position offset: Skewed die placement; swing\u2011arm ram mis\u2011aligned with die\u2011center. Never use over\u2011size die beyond swing\u2011arm working range.<\/li>\n
  7. Frequent motor\u2011protection tripping: Check overload condition; verify motor\u2011protection setting; check oil\u2011circuit jam.<\/li>\n<\/ol>\n<\/div><\/div><\/div><\/div><\/div>

    \u516d.Model Selection<\/strong><\/span><\/p>\n<\/div>

    Q16: Which customers are suitable for AFC\u2011622 Hydraulic Swing Arm Cutting Machine?<\/span><\/strong><\/p>\n

    A16:Recommended for shoe\u2011making, leather\u2011goods and luggage factories, for blanking small non\u2011metallic accessories with die size within 370\u00d7490mm. Compact footprint and low energy consumption. Up\u2011stream matches skiving and laminating machines.
    \nExtension:
    \n\u2705 Suitable scenarios: Small\u2011size part cutting; sampling & small\u2011medium\u2011batch production; limited workshop floor\u2011space requiring compact machine.
    \n\u274c Unsuitable scenarios: Large\u2011size die \/ large\u2011size workpiece; thick\u2011material multi\u2011layer heavy\u2011load cutting; demand for sustained pressure \u226525T.
    \nAlternative suggestion:
    \n1.Select AFC\u2011525 for shoe midsole & outsole.
    \n2.Select AFC\u2011525A for universal flat\u2011bed cutting of shoe\u2011material & leather\u2011goods.
    \n3.Select AFC\u2011780 for thick\u2011material and multi\u2011layer heavy\u2011load cutting.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

    <\/a><\/div><\/div><\/div><\/div><\/div>

    Swing Arm Cutting Machine<\/span><\/a><\/span><\/h2><\/div><\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":12046,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","footnotes":""},"categories":[50],"tags":[],"class_list":["post-12044","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-shoes-uppre-line"],"acf":[],"_links":{"self":[{"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/posts\/12044","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/comments?post=12044"}],"version-history":[{"count":1,"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/posts\/12044\/revisions"}],"predecessor-version":[{"id":12047,"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/posts\/12044\/revisions\/12047"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/media\/12046"}],"wp:attachment":[{"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/media?parent=12044"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/categories?post=12044"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/asfrom.com\/vi\/wp-json\/wp\/v2\/tags?post=12044"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}