{"id":11942,"date":"2026-09-11T07:17:29","date_gmt":"2026-09-11T07:17:29","guid":{"rendered":"https:\/\/asfrom.com\/?p=11942"},"modified":"2026-09-11T07:17:29","modified_gmt":"2026-09-11T07:17:29","slug":"asfrom-insole-transfer-machine-faq","status":"publish","type":"post","link":"https:\/\/asfrom.com\/ml\/asfrom-insole-transfer-machine-faq\/","title":{"rendered":"ASFROM Insole Transfer Machine FAQ"},"content":{"rendered":"

Insole Transfer Machine Base Q&A<\/span><\/p><\/h1><\/div>

\u0d12\u0d28\u0d4d\u0d28\u0d4d. \u0d05\u0d1f\u0d3f\u0d38\u0d4d\u0d25\u0d3e\u0d28 \u0d09\u0d7d\u0d2a\u0d4d\u0d2a\u0d28\u0d4d\u0d28 \u0d35\u0d3f\u0d35\u0d30\u0d19\u0d4d\u0d19\u0d7e<\/strong><\/span><\/p>\n<\/div>

Q1: What is AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/span><\/strong><\/p>\n

A1: AF\u2011IM01 (Single\u2011Foot) Automatic Insole Transfer Printing Machine is fully\u2011automatic pneumatic transfer equipment dedicated for insoles. High\u2011precision pneumatic components drive full working cycles. It integrates automatic gripper loading\/unloading, secondary positioning correction and label\u2011film tension control system. Equipped with PC\u2011based HMI touch\u2011screen control system, it supports single\u2011operator operation for automatic trademark hot stamping for shoe factories.<\/p>\n<\/div>

Q2: What are the core technical parameters of AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

A2:The core parameters are as follows:<\/span><\/p>\n

1.Model No.: AF\u2011IM01<\/p>\n

2.Voltage: 220V\/50HZ 1\u2011Phase<\/p>\n

3.Current:4.5A<\/p>\n

4.Total power:1KW\uff0cHeating power:600W<\/p>\n

5.Working air pressure:5\u20116kg\/cm\u00b2\uff0crecommended 5.5kg\/cm\u00b2<\/p>\n

6.Machine dimension:900\u00d7780\u00d71800mm<\/p>\n

7.Net Weight:240KG<\/p>\n<\/div>

Q3:What are the main features of AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

A3:<\/p>\n

1.PC intelligent control system with high\u2011resolution HMI touch screen for visualized operation. Pages include operation page, parameter page, manual commissioning page, I\/O status monitoring and alarm message page. It supports production counter. Each actuator can be tested independently under manual mode, with automatic fault alarm notification.
\n2.Precision pneumatic actuators. High\u2011precision pneumatic components drive all movements for fast response and stable running performance.
\n3.Fully\u2011automatic loading\u2011unloading system. Needle\u2011claw gripper automatically picks, transfers and collects insoles. Dual feeding hopper supports both left\u2011foot and right\u2011foot insole processing.
\n4.Dual secondary precision positioning system combining pre\u2011positioning and photo\u2011electric fine adjustment to achieve zero stamping position deviation. Positioning function can be disabled for around 20% higher output.
\n5.Dynamic tension control for label film. Label\u2011pulling motor automatically tensions and flattens transfer film to prevent graphic distortion and guarantee clear and complete printing result.
\n6.Single\u2011operator & single\u2011machine working mode reduces labor intensity.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

<\/span><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div>

2. \u0d2c\u0d3e\u0d27\u0d15\u0d2e\u0d3e\u0d2f \u0d35\u0d4d\u0d2f\u0d35\u0d38\u0d3e\u0d2f\u0d19\u0d4d\u0d19\u0d33\u0d41\u0d02 \u0d35\u0d38\u0d4d\u0d24\u0d41\u0d15\u0d4d\u0d15\u0d33\u0d41\u0d02<\/strong><\/span><\/p>\n<\/div>

Q4:What products and materials can AF\u2011IM01 Automatic Insole Transfer Printing Machine process?<\/span><\/strong><\/p>\n

A4:Specially used for trademark heat\u2011transfer stamping of various insoles, compatible with insole heat\u2011transfer label film.<\/p>\n<\/div>

Q5:What production scenarios is AF\u2011IM01 Automatic Insole Transfer Printing Machine mainly used for?<\/span><\/strong><\/p>\n

A5:Applied in shoe\u2011making factories and insole processing plants for mass automatic heat\u2011transfer production of insole trademarks.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

\u4e09. Utility, Installation & Commissioning<\/strong><\/span><\/p>\n<\/div>

Q6: What utility conditions are required for AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

A6:Power supply:220V 50Hz single\u2011phase, reliable protective earthing is mandatory. Air supply: external compressed air source, working pressure 5\u20116kg\/cm\u00b2, recommended 5.5kg\/cm\u00b2. Reserve sufficient space for operation and maintenance.<\/p>\n<\/div>

Q7: What are requirements for installation & placement of AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

A7:Place machine on flat hard floor. Lock castor brakes after installation to avoid shifting and shaking during operation. Keep clearance around machine for maintenance. Keep away from humid and heavy\u2011dust environment.<\/span><\/p>\n<\/div>

Q8:What is complete test\u2011running operating procedure for AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

A8:<\/p>\n

1.Confirm reliable earthing, connect compressed\u2011air pipe, adjust air pressure and lock castor brakes.
\n2.Power on, go to parameter page and set process parameters including temperature, pressing time, traverse speed, transfer stepping speed, gripper pick\/release time and positioning time.
\n3.Switch to manual page, test cylinders, motors and transfer\u2011alignment action individually, complete photo\u2011electric alignment calibration.
\n4.Confirm all home\u2011position signals are activated on I\/O monitoring page.
\n5.Enter operation page and switch on label\u2011pulling motor. Run trial production to verify stamping position and printing quality.
\n6.Start auto\u2011mode mass\u2011production after trial run acceptance. Enable or disable secondary positioning as required.
\n7.Execute \u3010Full Reset\u3011 after emergency\u2011stop or fault. Auto\u2011run can only be restarted after reset completion.<\/p>\n<\/div>

Q9: What precautions for air\u2011pressure adjustment?<\/span><\/strong><\/p>\n

A9:Standard working air pressure ranges 5\u20116kg\/cm\u00b2, recommended value 5.5kg\/cm\u00b2. Too low pressure causes weak cylinder movement and unstable gripping. Excessively high pressure accelerates pneumatic component wear. Check air source pressure periodically during production.<\/p>\n<\/div>

<\/lite-youtube><\/div><\/div><\/div><\/div><\/div><\/div>

4. \u0d2f\u0d28\u0d4d\u0d24\u0d4d\u0d30\u0d24\u0d4d\u0d24\u0d3f\u0d28\u0d4d\u0d31\u0d46 \u0d18\u0d1f\u0d28\u0d2f\u0d41\u0d02 \u0d18\u0d1f\u0d15\u0d19\u0d4d\u0d19\u0d33\u0d41\u0d02<\/strong><\/span><\/p>\n<\/div>

Q10:What are the 5 core assemblies of AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

A10:5 modular core assemblies:
\n1.Mechanical frame assembly; 2.Pneumatic actuator unit; 3.Insole feeding & collecting assembly; 4.Transfer\u2011film feeding & positioning mechanism; 5.PC touch\u2011screen electrical control system.
\n\u2011Mechanical frame: main frame, castor brakes, index plate.
\n\u2011Pneumatic actuator unit: needle\u2011claw cylinder, pressing cylinder, positioning cylinder and pneumatic valve banks.
\n\u2011Insole feeding & collecting assembly: dual feeding hoppers, receiving hopper, optical\u2011fiber level sensor, proximity limit switches.
\n\u2011Transfer\u2011film feeding & positioning mechanism: label\u2011pulling motor, tension unit, photo\u2011electric alignment sensor.
\n\u2011PC touch\u2011screen electrical control system: HMI touch panel, I\/O signal acquisition module, alarm unit, production counter module.<\/p>\n<\/div>

Q11: What is the function of secondary positioning system?<\/span><\/strong><\/p>\n

A11:It consists of pre\u2011positioning and photo\u2011electric fine\u2011tuning to correct insole placement deviation and ensure highly consistent stamping position for every insole. Disabling positioning function increases output by approx.20% with reduced positioning accuracy.<\/p>\n<\/div>

Q12: What are functions of optical\u2011fiber level sensor?<\/span><\/strong><\/p>\n

A12:Mounted on feeding hopper for insole level detection. Hopper will stop rising automatically when insole is 2\u20115\u202fmm away from optical\u2011fiber sensor to avoid insole damage. Clean dust on sensor surface regularly.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

\u4e94.Safety, Maintenance & Troubleshooting<\/strong><\/span><\/p>\n<\/div>

Q13: What safety notes for AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

\u0d0e \u0d2a\u0d24\u0d3f\u0d2e\u0d42\u0d28\u0d4d\u0d28\u0d4d:<\/p>\n

1.The whole machine must be reliably earthed against electric\u2011shock hazard.
\n2.Do not place hands into moving zones of cylinders, pressing mould and index plate during operation to prevent pinching or crushing injury.
\n3.Switch to manual mode for commissioning and inspection. Cut off power and air supply before maintenance work.
\n4.Full reset must be executed after emergency\u2011stop. Confirm all mechanisms return to home position before restarting auto\u2011production.
\n5.Keep compressed\u2011air source dry to avoid water\u2011induced damage to pneumatic components.<\/p>\n<\/div>

Q14: What is maintenance schedule for AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

A14:Per shift: Clean residues inside hoppers; confirm stable air pressure; check alarm messages; keep optical\u2011fiber and proximity sensors dust\u2011free.
\nWeekly: Inspect air pipe for leakage; test cylinder movements; calibrate photo\u2011electric alignment sensor position; verify emergency\u2011stop & reset function.
\nEvery half\u2011year: Inspect pneumatic fittings and solenoid valves; check cylinder seals and replace if needed; fasten electrical terminals.
\nYearly: Complete machine overhaul. Evaluate wear status of pneumatic parts and replace aged components.<\/p>\n<\/div>

Q15: Common faults and troubleshooting guidelines?<\/span><\/strong><\/p>\n

A15:<\/p>\n

    \n
  1. Cannot start auto mode: Go to I\/O status page and confirm home\u2011position signals of index plate, pick\u2011up cylinder upper limit, pressing cylinder upper limit and positioning cylinder are activated. Read fault codes in alarm window.<\/li>\n
  2. Trademark stamping position offset: Re\u2011run transfer alignment, adjust photo\u2011electric alignment sensor, inspect secondary\u2011positioning cylinder movement and verify process parameters.<\/li>\n
  3. Wrinkled or distorted printed label: Make sure label\u2011pulling motor is switched on, adjust transfer stepping speed and inspect label\u2011film tension mechanism.<\/li>\n
  4. Feeding hopper fails to stop rising automatically: Adjust distance between optical\u2011fiber sensor and insole side face to 2\u20115\u202fmm, clean dust on sensor lens.<\/li>\n
  5. Weak cylinder movement: Verify air pressure reaches 5\u20116kg\/cm\u00b2, check pipe leakage and inspect solenoid\u2011valve malfunction.<\/li>\n<\/ol>\n<\/div><\/div><\/div><\/div><\/div>

    \u516d.Model Selection<\/strong><\/span><\/p>\n<\/div>

    Q16: Which customers are suitable for AF\u2011IM01 Automatic Insole Transfer Printing Machine?<\/span><\/strong><\/p>\n

    A16:Recommended for shoe factories and insole manufacturers for high\u2011volume insole trademark heat transfer, for scenarios requiring high automation, labor saving and high positioning accuracy. It is dedicated only for insole label transfer and not suitable for general fabric heat\u2011press work. Select HP2\u201140\u00d760, HP\u201138 or H\u2011SD09\u201138<\/strong> universal heat\u2011press series for common fabric processing.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

    <\/a><\/div><\/div><\/div><\/div><\/div>

    Insole Transfer MachineInsole Transfer MachineInsole Transfer MachineInsole Transfer MachineInsole Transfer MachineInsole TInsole Transfer MachineInsole Transfer MachineInsole Transfer MachineInsole Transfer Machineransfer MachineInsole Transfer MachineInsole Transfer Machine<\/span><\/a><\/span><\/h2><\/div><\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":11946,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","footnotes":""},"categories":[51],"tags":[],"class_list":["post-11942","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-soling-machine"],"acf":[],"_links":{"self":[{"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/posts\/11942","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/comments?post=11942"}],"version-history":[{"count":2,"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/posts\/11942\/revisions"}],"predecessor-version":[{"id":11948,"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/posts\/11942\/revisions\/11948"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/media\/11946"}],"wp:attachment":[{"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/media?parent=11942"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/categories?post=11942"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/asfrom.com\/ml\/wp-json\/wp\/v2\/tags?post=11942"}],"curies":[{"name":"\u0d21\u0d2c\u0d4d\u0d32\u0d4d\u0d2f\u0d41\u0d2a\u0d3f","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}