ഒന്ന്. അടിസ്ഥാന ഉൽപ്പന്ന വിവരങ്ങൾ

Q1: What is the AG-868 Hot Melt Adhesive Coating Machine?

A1:The AG-868 Hot Melt Adhesive Coating Machine is a hot melt adhesive coating machine, mainly used to melt solid hot melt adhesive into liquid and then evenly coat it on the substrate. It is widely used in different manufacturing industries such as shoemaking, packaging, wood industry, textile industry, toy industry, leather shoes industry, sanitary products and electrical appliances. The machine features a glue circuit isolation design, two-stage filter equipment, Teflon-treated glue barrel, high-quality glue spraying effect and convenient coating range operation, suitable for various types and shapes of hot melt adhesives.

Q2: What is the AG-868 used for?

A2: It is mainly used to melt solid hot melt adhesive into liquid and then evenly coat it on the substrate. Specific functions include:

1. Gluing for the shoemaking industry.

2. Gluing for the packaging industry.

3. Gluing for the wood industry.

4. Gluing for the textile industry.

5. Gluing for the toy industry.

6. Gluing for the leather shoes industry.

7. Gluing for sanitary products.

8. Gluing for electrical appliances and other different manufacturing industries.

Q3:What are the key technical parameters of the AG-868?

എ3:Key technical parameters of the AG-868 are as follows:

1. Model No.: AG-868 / AG-868-1

2. Power Supply: 220V / 50HZ / 1Phase

3. വൈദ്യുത താപം: 1100W

4. വായു മർദ്ദം: നാല് കിലോഗ്രാം

5. വടക്ക്-പടിഞ്ഞാറ്/വടക്ക്-കിഴക്ക്: 55Kg/70Kg (AG-868), 66Kg/84Kg (AG-868-1)

6. യന്ത്രത്തിൻ്റെ വലുപ്പം: 86×47×140CM (AG-868), 97×46×124CM (AG-868-1)

The power supply affects the usable region, electric heat power affects melting speed, air pressure affects glue spraying effect, and size and weight affect installation space and handling.

Q4:What are the main features of the AG-868?

എ4:Main features include:

1. Glue circuit system performance: Glue circuit isolation design. The unique glue feeding structure makes the glue circuit absolutely isolated from the air, avoiding oxidation of hot melt adhesive, ensuring its performance and quality stability, extending service life and reducing material waste.

2. Filter equipment performance: Anti-clogging filter design. Two-stage filter equipment is used, first coarse filtration and then fine filtration, to remove impurities in the hot melt adhesive, reduce nozzle clogging, and ensure the normal operation of the nozzle and the continuity and stability of coating.

3. Glue barrel performance: High-quality glue barrel treatment. The glue barrel is treated with Teflon, which is corrosion-resistant and non-sticky. It can withstand high temperatures, is easy to clean up residual hot melt glue, and can make solid hot melt glue melt quickly and evenly, not easy to carbonize.

4. Applicability of adhesive: Applicable to various types of adhesives. Applicable to hot melt adhesives of various types (granular, block, powder, etc.) and shapes (round, square, irregular, etc.) to meet the diverse needs of users.

5. Coating performance: High-quality glue spraying effect. The glue spraying force is strong, the speed is fast, and it is stable and uniform, which can ensure that the hot melt adhesive fully covers the surface of the adhered object, forming a uniform adhesive layer, achieving firm adhesion, and adapting to the coating of products of different shapes.

6. Operational convenience: Convenient coating range operation. The coating range is easy to operate, and the operator can easily adjust the coating width and length to meet the coating needs of products of different sizes and shapes, reduce work difficulty and improve production efficiency.

2. ബാധകമായ വ്യവസായങ്ങളും വസ്തുക്കളും

Q5: What materials can the AG-868 process?

എ5:The AG-868 is suitable for hot melt adhesives of various types and shapes:

1. Types: granular, block, powder, etc.

2. Shapes: round, square, irregular, etc.

3. Substrates: commonly used substrates in shoemaking, packaging, wood, textile, toy, leather shoes, sanitary products, electrical appliances and other industries.

Q6: What industries or factories use the AG-868?

എ6: It is widely used in the following industries:

1. Shoemaking factories

2. Packaging factories

3. Wood factories

4. Textile factories

5. Toy factories

6. Leather shoes factories

7. Sanitary products factories

8. Electrical appliances factories

And other manufacturers requiring hot melt adhesive coating.

三. Functions & Performance

Q7: What is the function of the glue circuit isolation design on the AG-868?

എ7:The main functions of the glue circuit isolation design include:

1. Makes the glue circuit absolutely isolated from the air.

2. Avoids oxidation of hot melt adhesive.

3. Ensures its performance and quality stability.

4. Extends service life.

5. Reduces material waste.

Q8:What is the function of the two-stage filter equipment on the AG-868?

എ8:The main functions of the two-stage filter equipment include:

1. First coarse filtration and then fine filtration.

2. Removes impurities in the hot melt adhesive.

3. Reduces nozzle clogging.

4. Ensures normal operation of the nozzle.

5. Ensures continuity and stability of coating.

Q9: What is the function of the Teflon-treated glue barrel on the AG-868?

എ9:The main functions of the Teflon-treated glue barrel include:

1. Corrosion-resistant.

2. Non-sticky.

3. Can withstand high temperatures.

4. Easy to clean up residual hot melt glue.

5. Can make solid hot melt glue melt quickly and evenly.

6. Not easy to carbonize.

Q10: How is the glue spraying effect of the AG-868?

എ പത്ത്:The glue spraying effect of the AG-868 includes:

1. Strong glue spraying force.

2. Fast speed and stable and uniform.

3. Can ensure that the hot melt adhesive fully covers the surface of the adhered object.

4. Forms a uniform adhesive layer.

5. Achieves firm adhesion.

6. Adapts to the coating of products of different shapes.

Q11: How to operate the coating range of the AG-868?

എ11:The coating range operation features include:

1. The coating range is easy to operate.

2. The operator can easily adjust the coating width and length.

3. Meets the coating needs of products of different sizes and shapes.

4. Reduces work difficulty.

5. Improves production efficiency.

四. Installation & Operation

Q12: What should be noted during AG-868 installation?

എ12: Installation notes include:

1. First set up foot-pad and table. Fix the machine on the table.

2. Then connect the foot-pad switch to the lower part of the main body and lock it.

3. Use single phase and 220 voltage.

4. Keep the pressure gauge on 4 KG.

5. Do not use a knife or sharp tool to clean the inner part of the glue trough. It may damage the inner surface.

Q13: What is the startup procedure for the AG-868?

എ പതിമൂന്ന്:The startup procedure is as follows:

1. Turn on the electrical heating switch.

2. Adjust the temperature controller gauge of the glue trough to the temperature of about 160℃.

3. Then adjust the temperature controller gauge of the glue gun to the temperature of about 180–190℃.

4. After about 20 minutes of heating, after the glue trough gets the right temperature, power can be connected to the motor switch.

5. Now turn on the motor switch and the motor will run.

6. If you turn on the motor switch and the motor does not work, it means that glue trough temperature is not enough and should be heated more.

7. Open the glue trough gate and put a piece of glue in for melt.

8. After melt, it is used for spray. When out of glue, we can put another glue piece to melt again.

9. Do not keep too much glue in the glue trough and heating. It will deduct the melt glue’s quality.

Q14: How to turn off the AG-868?

എ14:The shutdown procedure is as follows:

1. First turn off the motor switch.

2. Then turn off the temperature switch.

3. During afternoon nap: Turn off the motor switch, then adjust the glue trough and glue gun temperature to 120℃ for pre-heating.

五.Troubleshooting

Q15: What to do if the AG-868 cannot spray hot melt adhesive?

A15:If no hot melt adhesive is sprayed, troubleshoot as follows:

1. Three-point combination air pressure insufficient: Increase air pressure to 3.5KG/cm².

2. Hot melt adhesive not completely melted: Check fuse and glue trough temperature is 160℃.

3. Gun body temperature insufficient: Check fuse and gun body temperature is 190–210℃.

4. Nozzle clogged: Soak the nozzle in toluene and clean it with a thin wire.

5. No air in the Teflon air pipe: Check whether the solenoid valve is faulty.

6. Motor not started: Check whether the fuse and starter are faulty.

Q16: What to do if the AG-868 glue spraying area is too small?

എ16:If the glue spraying area is too small, check:

1. Gun body temperature insufficient: Can be increased by another 10℃.

Q17: What to do if the AG-868 gun body leaks glue?

A17: If the gun body leaks glue, troubleshoot as follows:

1. Insufficient internal sealing of the gun body: Fine-tune and tighten the long screw above the gun body.

2. Spring carbon deposit inside the gun body upper cover: First remove carbon deposit, then add 1–2 drops of lubricating oil.

3. High-temperature oil seal inside the gun body carbonized: Replace with a high-temperature oil seal of matching specifications.

Q18: What to do if the AG-868 machine leaks glue?

A18: If the machine leaks glue, check:

1. Internal high-temperature oil seal carbonized: Replace with a high-temperature oil seal of matching specifications.

六.Hot Melt Adhesive Usage Precautions

Q19: How to control the temperature when using hot melt adhesive on the AG-868?

A19:Temperature control points:

1. Temperature according to the glue trough specified temperature +10℃.

2. Temperature too high, hot melt adhesive will turn yellow or carbonize.

3. Abnormal handling methods:

   • Pay attention to whether the temperature gauge and electric heating tube are faulty.

   • Remove the deteriorated hot melt adhesive in the glue trough.

   • Put new glue in the glue trough and use at a lower temperature.

4. If it turns yellow or carbonizes, the quality of the hot melt adhesive is completely destroyed.

Q20: How to control the glue quantity and uniformity on the AG-868?

A20:Glue quantity and uniformity control points:

1. Adjust the spray thickness according to the pulling strength and coat evenly.

2. Abnormal conditions:

   • Insufficient pulling force.

   • Air wrapping phenomenon after forming.

3. Abnormal handling methods:

   • Set the standard coating amount according to the coating position and material.

   • Skilled operation keeps the glue spraying surface uniform.

   • Apply appropriate pressure.

4. Sufficient glue quantity and uniform spraying are absolutely the guarantee of quality.

Q21: How to control the construction time on the AG-868?

A21:Construction time control points:

1. Complete processing within the specified time.

2. Shorten the time as the indoor temperature drops (such as in winter).

3. Abnormal condition: Should have viscosity reduction, affecting bonding quality.

4. Abnormal handling methods:

   • Do not point the fan at the coated product, to prevent the hot melt adhesive from accelerating cooling and shortening the bonding time.

   • In cold winter, adjust the bonding time appropriately according to the actual temperature.

   • Adjust the construction process, match the glue spraying speed, and schedule the bonding personnel operation.

Q22:What are the material requirements for the AG-868?

A22:Material requirements points:

1. Material smooth or containing release agent, need to increase glue amount or double-sided coating.

2. Abnormal conditions:

   • Cannot bond.

   • Insufficient pulling force.

3. Abnormal handling methods:

   • Double-sided glue spraying or coating.

   • Increase glue amount at key positions.

   • Adjust material.

4. Oil leather and solvent-coated materials are less suitable for hot melt adhesive.

5. Use according to original factory number for warehousing and material requisition.

Q23:What to do if the AG-868 hot melt adhesive deteriorates?

A23:Hot melt adhesive deterioration handling points:

1. Abnormal conditions:

   • Cannot bond.

   • Insufficient pulling force.

   • Hot melt adhesive deteriorated.

2. Abnormal handling methods:

   • Clear the glue trough before putting in new glue.

3. Pay attention to hot melt adhesive according to nature, shape or number for warehousing and material requisition.

七.Selection & After-sales

Q24:How to choose the AG-868 Hot Melt Adhesive Coating Machine?

A24:Choose based on the following factors:

1. Actual production needs: Confirm whether hot melt adhesive coating functions are needed.

2. Processing industry: Confirm whether it is shoemaking, packaging, wood, textile, toy, leather shoes, sanitary products, electrical appliances, etc.

3. Hot melt adhesive type: Confirm whether it is granular, block, powder, etc.

4. Coating width and length: Confirm whether it meets process requirements.

5. Power conditions: Confirm whether the factory has 220V/50HZ/1ഫേസ് power.

6. Air pressure conditions: Confirm whether there is നാല് കിലോഗ്രാം air pressure.

7. Installation space: Confirm whether 86×47×140CM or 97×46×124CM can be placed.

8. Model selection: Confirm whether it is എജി-868 or AG-868-1.

9. After-sales support: Confirm whether the manufacturer provides installation guidance, operation training and after-sales service.

Q25: What should I consider when buying the AG-868?

A25:Buyers should consider the following factors:

1. Power and electric heat power: Confirm whether 220V/50HZ/1ഫേസ് and 1100W are available.

2. വായു മർദ്ദം: Confirm whether നാല് കിലോഗ്രാം meets production needs.

3. Machine size: Confirm whether 86×47×140CM or 97×46×124CM fits the installation space.

4. Machine weight: Confirm whether 55Kg or 66Kg requires consideration for handling and load-bearing.

5. Hot melt adhesive type: Confirm whether the hot melt adhesive used is compatible with the machine.

6. Spare parts availability: Confirm supply of nozzle, glue barrel, heating tube and other consumables.

7. After-sales support: Confirm installation guidance, operation training and after-sales service.

8. Delivery time and warranty period: Confirm delivery time and warranty policy.

Q26: Can the AG-868 be customized?

A26:Customization can be confirmed with the manufacturer according to actual requirements. Possible customization directions include:

1. Working voltage

2. Power interface

3. Coating width and length

4. Nozzle specifications

5. Glue trough capacity

6. Appearance color

Before customization, clarify production needs, material types, hot melt adhesive type, coating width requirements and installation space so the manufacturer can provide a suitable solution.

Q27: Does the manufacturer provide installation and technical support?

A27:The manufacturer can provide the following services:

1. Installation guidance

2. Commissioning support

3. Operation training

4. വിൽപ്പനാനന്തര സേവനം

5. Spare parts supply

Specific service scope depends on order and region. Please confirm with the supplier before purchase. It is recommended to clarify installation, training, warranty and spare parts supply in the purchase contract.