I. Informazioni di base sul prodotto

Domanda 1:What is the AS-308 Toe-Puff Skiving Machine?

A1: The AS-308 Toe-Puff Skiving Machine is an edge and surface skiving machine specially designed for leather, artificial leather, rubber and other materials, suitable for edge and surface skiving of products such as shoes, belts, wallets and gloves. The machine adopts an innovatively designed three part water drip spray device that can be flexibly adjusted to meet diverse thinning needs, ensuring high precision and high efficiency of the processing process. At the same time, it is equipped with a special spray drip device designed for TPR Counter edge skiving to meet high-standard processing needs. The bevel and angle of the material can be easily adjusted through the iron feeding wheel, with precision up to 0.1mm, achieving precise edge skiving operation. The machine also supports stepless speed adjustment, and the speed can be adjusted as needed to adapt to a variety of processing technologies.

Domanda 2: What is the AS-308 used for?

A2:Viene utilizzato principalmente per edge and surface skiving of leather, artificial leather, rubber and other materials. Specific functions include:

1. Edge skiving of leather, artificial leather and rubber for shoes.

2. Edge skiving of belts.

3. Edge and surface skiving of wallets.

4. Edge skiving of gloves.

5. Edge skiving of TPR Counter materials.

6. Adjusting the bevel and angle of the material through the iron feeding wheel to achieve precise edge skiving operation.

7. By replacing the presser foot and upper feeding reinforcement device of different specifications, the edge skiving tasks of TPR Counter materials of different thicknesses can be met.

Domanda 3: What are the key technical parameters of the AS-308?

A3: Key technical parameters of the AS-308 are as follows:

1. Codice modello: AS-308

2. Potenza del motore: 200–400W

3. Velocità del coltello: 1000–1200rpm

4. Dimensioni della macchina: 450×350×340mm

5. Peso netto: 37,4 kg

Supplementary parameters from the manual:

1. Dimensions: 450(W)×380(H)×340(D) mm

2. Motor capacity: 200–400W

3. Knife speed: 1,000–1,200 rpm

4. Peso: 37.4 kgf

Il motor power and knife speed affect cutting capability, and dimensioni e peso della macchina influiscono sullo spazio necessario per l'installazione e sulla movimentazione.

Domanda 4:What are the main features of the AS-308?

A4:Le caratteristiche principali includono:

1. Innovative configuration, outstanding performance: The innovatively designed three part water drip spray device can be flexibly adjusted to meet the diverse thinning needs, ensuring high precision and high efficiency of the processing process. At the same time, it is equipped with a special spray drip device designed for TPR Counter edge skiving to meet high-standard processing needs.

2. Precise adjustment, flexible operation: The bevel and angle of the material can be easily adjusted through the iron feeding wheel, so that its precision can reach up to 0.1mm, thereby achieving precise edge skiving operation.

3. Strong compatibility with multiple materials: By replacing the presser foot and upper feeding reinforcement device of different specifications, the edge skiving tasks of TPR Counter materials of different thicknesses can be met.

4. Multiple speeds: Multiple speeds device can adjust the work speed as needed, adapt to a variety of processing technologies, and provide greater flexibility for the processing process.

II. Settori e materiali applicabili

Domanda 5: What materials can the AS-308 process?

A5:The AS-308 is suitable for the following materials:

1. Leather

2. Artificial leather

3. Rubber

4. TPR Counter materials

5. Other materials requiring edge and surface skiving

The machine can perform edge and surface skiving on these materials.

Domanda 6: What industries or factories use the AS-308?

A6:È ampiamente utilizzato nei seguenti settori:

1. Fabbriche di scarpe

2. Belt factories

3. Wallet factories

4. Glove factories

5. Leather goods factories

6. TPR Counter processing factories

And other manufacturers requiring edge and surface skiving.

Domanda 7: What products is the AS-308 suitable for?

A7:Suitable for the following products:

1. Shoes

2. Belts

3. Wallets

4. Gloves

5. Various leather products

6. TPR Counter material products

By replacing the presser foot and upper feeding reinforcement device of different specifications, the edge skiving tasks of TPR Counter materials of different thicknesses can be met.

III. Funzioni e prestazioni

Domanda 8:What is the edge skiving accuracy of the AS-308?

A8:The edge skiving precision of the AS-308 is up to 0.1mm. By easily adjusting the bevel and angle of the material through the iron feeding wheel, precise edge skiving operation can be achieved, meeting the processing needs of leather, artificial leather, rubber and TPR Counter materials with high edge quality requirements.

Domanda 9: What is the function of the three part water drip spray device on the AS-308?

A9:The AS-308 adopts an innovatively designed three part water drip spray device. Main functions include:

1. Can be flexibly adjusted to meet diverse thinning needs.

2. Ensures high precision and high efficiency of the processing process.

3. Dotato di un special spray drip device designed for TPR Counter edge skiving to meet high-standard processing needs.

4. Helps cool the blade and material, reducing friction and heat.

5. Helps improve edge skiving quality.

Domanda 10:What is the function of the stepless speed adjustment on the AS-308?

A10:The AS-308 has built-in stepless speed change. Main functions include:

1. Speed can be adjusted as needed.

2. Adapts to a variety of processing technologies.

3. Provides greater flexibility for the processing process.

4. Allows adjusting the optimal cutting speed according to different materials and thicknesses.

Q11: How is the multi-material compatibility of the AS-308 reflected?

A11:Multi-material compatibility is reflected in:

1. Suitable for leather, artificial leather, rubber and other materials.

2. By replacing the presser foot and upper feeding reinforcement device of different specifications, the edge skiving tasks of TPR Counter materials of different thicknesses can be met.

3. Il bevel and angle can be adjusted according to material characteristics.

4. The processing speed can be adjusted through stepless speed change to adapt to different materials.

四. Installation & Commissioning

Domanda 12: What should be noted during AS-308 installation?

A12:Installation notes include:

1. Il hinge at the rear of the machine is fixed with screws.

2. Drill a hole of about 170mm×150mm under the bell shaped knife so that scrap falls through the hole.

3. When a motor is directly connected to the machine, a space of more than 300mm is provided between the machine pulley and that of the motor.

4. The motor is installed so that its pulley becomes parallel with the machine’s pulley.

5. A V pulley of 50mm to 60mm must be used for the motor.

Domanda 13: What is the rotation direction of the AS-308?

A13:The machine should rotate clockwise when viewed from its right hand side.

五.Lubrication & Maintenance

Domanda 14:  What are the lubrication requirements for the AS-308?

A14:Lubrication requirements are as follows:

1. Before the machine is put into operation, antitrust oil coated on the plated parts must be thoroughly wiped away with a piece of dry cloth so that a work piece is not smudged with oil.

2. If the bell shaped knife is smudged with oil, it cannot be ground as oil adheres to an emery wheel.

3. Before operating the machine, be sure to supply machine oil to those portions marked with (Δ).

4. Supply a mixture of machine oil and grease to the portion marked with (Δ).

Domanda 15: What is the lubrication cycle for the AS-308?

A15:Lubrication cycles are as follows:

1. Parts marked with (Δ): Once every 3–4 days.

2. Parts marked with (Δ): Once a month.

六.Presser Feet & Accessories

Domanda 16: What special presser feet are available for the AS-308?

A16:When a work piece is to be skived into a special shape, one of the following type presser feet should be used:

1. 116 presser foot

2. 112 presser foot

3. 120 presser foot

4. 121 presser foot

5. 513 presser foot

6. 526 presser foot

Domanda 17: What special roller presser feet are available for the AS-308?

A17:A roller presser foot must be used for a thick or hard work piece of special shape, including:

1. 131

2. 132

3. 133

4. 134

5. 135

6. 118

7. 119

8. 531

9. 532

Domanda 18: What accessories are included with the AS-308?

A18:Accessories attached include:

1. 114 Presser foot

2. 115 Presser foot

3. 116 Presser foot

4. 601 Guide

5. 602 Knurled screw for guide

6. 801 Emery wheel dressing tool

7. 802 Oil stone

8. 803 Tool for removing disc

9. 805 Spanner for emery wheel

10. 17mm Spanner

11. Oil can

12. Screw driver

13. Socket wrench (4,5,6mm)

七.Troubleshooting

Q19:  What to do if the emery wheel grinds the bell shaped knife but the edge is not sharpened well on the AS-308?

A19:Possible causes and solutions are as follows:

1. Oil adheres to the emery wheel: Wipe away oil from the wheel completely.

2. The emery wheel is clogged with iron powders: Rotate the wheel and apply the dresser to the wheel.

八.Selection & After-sales

Q20:How to choose the AS-308 Toe-Puff Skiving Machine?

A20: Scegli in base ai seguenti fattori:

1. Esigenze effettive di produzione: Confirm whether edge and surface skiving functions are needed.

2. Materiali di lavorazione: Confirm whether they are leather, artificial leather, rubber, TPR Counter materials, etc.

3. Edge skiving accuracy: Verificare se 0.1mm soddisfa i requisiti di processo.

4. Knife speed: Verificare se 1000–1200rpm soddisfa i requisiti di processo.

5. Spazio di installazione: Verificare se 450×350×340mm può essere collocato.

6. Operation mode: Verificare se stepless speed adjustment is needed.

7. Presser foot and upper feeding reinforcement device: Confirm whether the required specifications are easy to purchase.

8. Assistenza post-vendita: Verificare se il produttore fornisce istruzioni per l'installazione, formazione sul funzionamento e assistenza post-vendita.

Q21:What should I consider when buying the AS-308?

A21:Gli acquirenti dovrebbero tenere in considerazione i seguenti fattori:

1. Motor power: Se 200–400W meets production needs.

2. Edge skiving accuracy: Se 0.1mm soddisfa i requisiti di processo.

3. Knife speed: Se 1000–1200rpm soddisfa i requisiti di processo.

4. Dimensioni della macchina: Se 450×350×340mm si adatta allo spazio di installazione.

5. Peso della macchina: Se 37,4 kg richiede attenzione per quanto riguarda la movimentazione e la capacità di carico.

6. Presser foot specifications: Confirm whether the required presser feet and upper feeding reinforcement devices are easy to purchase.

7. Disponibilità dei ricambi: Confirm supply of emery wheel, belt, presser foot and other consumables.

8. Assistenza post-vendita: Verifica delle istruzioni di installazione, della formazione sul funzionamento e dell'assistenza post-vendita.

9. Tempi di consegna e periodo di garanzia: Verificare i tempi di consegna e le condizioni di garanzia.

Q22:Can the AS-308 be customized?

A22:La personalizzazione può essere concordata con il produttore in base alle effettive esigenze. Tra le possibili opzioni di personalizzazione figurano:

1. Tensione di esercizio

2. Interfaccia di alimentazione

3. Presser foot specifications

4. Upper feeding reinforcement device specifications

5. Knife speed range

6. Colore dell'aspetto

Prima di procedere alla personalizzazione, chiarire production needs, material types, edge skiving accuracy requirements, TPR Counter material thickness and installation space in modo che il produttore possa fornire una soluzione adeguata.

Q23:Il produttore offre assistenza tecnica e per l'installazione?

A23:Il produttore è in grado di fornire i seguenti servizi:

1. Istruzioni per l'installazione

2. Assistenza alla messa in servizio

3. Formazione operativa

4. Assistenza post-vendita

5. Fornitura di pezzi di ricambio

Ambito specifico del servizio dipende dall'ordine e dalla regione. Si prega di verificare con il fornitore prima dell'acquisto. Si consiglia di chiarire installazione, formazione, garanzia e fornitura di pezzi di ricambio nel contratto di acquisto.