১. মৌলিক পণ্য তথ্য

Q1: What is the CM-12T Three Station Sliding Seamless Press Machine?

A1: The CM-12T Three Station Sliding Seamless Press Machine is a three-station hot and cold pressing machine, suitable for various shoe uppers seamless hot bonding and 4D upper bonding. This machine adopts an automatic sliding table with self-cooling three-station hot and cold pressing design, and innovatively adopts a combination layout of hot molds on both sides and cold molds in the middle, and the molds can realize automatic entry and exit functions. This design greatly improves the safety and convenience of operation. The three-station structure of two hot and one cold significantly improves production efficiency. With the cold setting system, the finished product process is more beautiful and the performance is more stable.

Q2:  What is the CM-12T used for?

A2:It is mainly used for shoe uppers seamless hot bonding and 4D upper bonding. Specific functions include:

1. Seamless hot bonding of various shoe uppers.

2. 4D upper bonding.

3. The three-station structure of two hot and one cold significantly improves production efficiency.

4. With the cold setting system, the finished product process is more beautiful and the performance is more stable.

5. Supports single or double-person collaborative operation.

Q3:  What are the key technical parameters of the CM-12T?

A3:Key technical parameters of the CM-12T are as follows:

1. Model No.: সিএম-১২টি

2. ভোল্টেজ: ৩৮০ভি/৫০হার্টজ/৩ফেজ

3. মোট শক্তি: ২২.৭ কিলোওয়াট

4. শীতলীকরণ ক্ষমতা: ১.৫ কিলোওয়াট

5. বায়ু চাপ: ০.৪ গ্রাম/বর্গসেন্টিমিটার (Note: the unit may be 0.4MPa or 0.4kg/cm², please confirm)

6. তাপমাত্রা: 0–350℃

7. ছাঁচের আকার: 400×600mm

8. মেশিনের আকার: 2000×1000×2050mm

9. চাপ: ১২টি/১৮টি

10. মেশিনের ওজন: ১০০০ কেজি

The total power and refrigeration power affect heating and cooling capability, temperature range affects applicable processes, mould size determines the processable material area, চাপ affects pressing firmness, and machine size and weight affect installation space and handling.

Q4:What are the main features of the CM-12T?

A4:Main features include:

1. Core Performance Of The Equipment: This machine adopts an automatic sliding table with self-cooling three-station hot and cold pressing design, and innovatively adopts a combination layout of hot molds on both sides and cold molds in the middle, and the molds can realize automatic entry and exit functions. This design greatly improves the safety and convenience of operation. The three-station structure of two hot and one cold significantly improves production efficiency. With the cold setting system, the finished product process is more beautiful and the performance is more stable.

2. Temperature control system: Equipped with a fully intelligent temperature control system, it is easy to operate and has the characteristics of precise and stable temperature control. The hot mold uses thickened material and multi-tube electric heating technology to ensure uniform heat conduction, effectively reduce heat energy consumption, and maintain a balanced and stable temperature. The cold mold adopts a large-hole inlet and outlet internal circulation cooling method, and no external connecting pipe is required on the outside, which not only makes the appearance of the equipment more simple and beautiful, and easy to operate, but also has excellent cooling effect when matched with a freezer.

3. Pressing system: Adopting gas-oil mixed boosting technology, the pressure output is stable and reliable. The pressing time can be displayed and set digitally to accurately control the pressing process and ensure production quality. At the same time, the pressing time, temperature and boosting pressure can be flexibly adjusted according to production needs.

4. Operating system: The unique three-station design with two hot and one cold stations optimizes space utilization, significantly improves production efficiency, and supports single or double-person collaborative operation. Simply place the material in the hot pressing area and start the production operation through the double switch start mechanism.

5. Safety assurance system: The equipment is equipped with a sliding table feeding device, which is easy to operate and highly safe. It is equipped with a temperature mold safety detection function to monitor the equipment’s operating status in real time. A high-power cooling system and a water shortage alarm device further ensure the safe and stable operation of the equipment and effectively reduce safety risks.

6. Process advantages: With stable temperature control and simple operation process, combined with hot pressing bonding and cooling shaping process, the products produced are more exquisite in appearance and more guaranteed in quality.

২. প্রযোজ্য শিল্প ও উপকরণ

Q5: What materials can the CM-12T process?

A5:The CM-12T is suitable for the following materials:

1. Various shoe uppers

2. 4D shoe uppers

The machine is mainly used for shoe uppers seamless hot bonding and 4D upper bonding.

Q6: What industries or factories use the CM-12T?

A6: It is widely used in the following industries:

1. Shoe factories

2. Shoe upper processing factories

3. Sports goods factories

Mainly used for seamless hot bonding of shoe upper materials.

三. Functions & Performance

Q7:What are the advantages of the three-station two-hot-one-cold design on the CM-12T?

A7:The advantages of the three-station two-hot-one-cold design include:

1. Optimizes space utilization.

2. Significantly improves production efficiency.

3. Supports single or double-person collaborative operation.

4. With the cold setting system, the finished product process is more beautiful and the performance is more stable.

5. The molds can realize automatic entry and exit functions.

6. Improves the safety and convenience of operation.

Q8:What are the features of the temperature control system on the CM-12T?

A8:Temperature control system features include:

1. Equipped with a fully intelligent temperature control system.

2. Easy to operate.

3. Precise and stable temperature control.

4. The hot mold uses thickened material.

5. Uses multi-tube electric heating technology.

6. Ensures uniform heat conduction.

7. Effectively reduces heat energy consumption.

8. Maintains a balanced and stable temperature.

9. The cold mold adopts a large-hole inlet and outlet internal circulation cooling method.

10. No external connecting pipe is required on the outside.

11. The equipment appearance is more simple and beautiful, and easy to operate.

12. Matched with a freezer, it has excellent cooling effect.

Q9: What are the features of the pressing system on the CM-12T?

A9:Pressing system features include:

1. Adopting gas-oil mixed boosting technology.

2. Pressure output is stable and reliable.

3. The pressing time can be displayed and set digitally.

4. Accurately controls the pressing process.

5. Ensures production quality.

6. The pressing time, temperature and boosting pressure can be flexibly adjusted according to production needs.

Q10:What safety assurance systems does the CM-12T have?

A10:Safety assurance systems include:

1. Sliding table feeding device, easy to operate and highly safe.

2. Temperature mold safety detection function to monitor the equipment’s operating status in real time.

3. High-power cooling system.

4. Water shortage alarm device.

5. Further ensure the safe and stable operation of the equipment.

6. Effectively reduce safety risks.

四.Temperature Controller Operation

Q11: What do the indicator light states on the CM-12T temperature controller represent?

A11: Indicator light status description:

1. Working indicator: Bright = Working status; Flashing = Delay working status; Off = Stop working status.

2. Setting indicator: Bright = In setting status; Off = Not in setting status.

Q12: What parameters can be set on the CM-12T temperature controller?

A12:Temperature controller parameters include:

1. F0 Return setting: 1~15, factory value 3℃, absolute value of the difference between open and stop temperature.

2. F1 Compressor delay: 0~9, factory value 3 minutes, protection time for reset of compressor.

3. F2 Minimum temp.: -40~69, factory value -20℃, limit minimum temp.

4. F3 Maximum temp.: -39~70, factory value 20℃, limit maximum temp.

5. F4 Mode selection: 1 cool, 2 Hot, 3 Alarm, factory value 1, function mode selection.

6. F5 Temp. correction: -5~+5, factory value 0, correction for actual temperature deviation.

Q13:How to operate the CM-12T temperature controller?

A13:Temperature controller operation methods:

1. Key functions:

   • Press the Power key for more than 3 seconds to turn off/on the temperature controller.

   • Press the Up/Down key to view the temperature set value; change parameter items and parameter values.

   • Press the Setup key to enter the parameter change state and return to the upper parameter item during parameter setting.

   • Press the Setup key for more than 5 seconds to enter the user setting state; the system saves the set value and exits.

   • Press the Setup key + Up key for more than 5 seconds to enter the manager menu.

2. Parameter viewing (non-setting state): Press the Up or Down key to display the current set value for 2 seconds and return.

3. Setting temperature value in user state: Press the Setup key for more than 5 seconds to display the last set value, press the Up or Down key to adjust, then press the Setup key to save and exit.

4. Manager menu item setting: Press the Setup key + Up key for more than 5 seconds to enter

.

五.Selection & Purchasing

Q14: How to choose the CM-12T Three Station Sliding Seamless Press Machine?

A14:Choose based on the following factors:

1. Actual production needs: Confirm whether three-station hot and cold pressing functions are needed.

2. Processing materials: Confirm whether it is various shoe uppers, 4D shoe uppers, etc.

3. Mould size: Confirm whether 400×600mm meets processable material area requirements.

4. Temperature range: Confirm whether 0–350℃ meets process requirements.

5. Pressure: Confirm whether ১২টি/১৮টি meets pressing firmness requirements.

6. Power conditions: Confirm whether the factory has ৩৮০ভি/৫০হার্টজ/৩ফেজ power.

7. Air pressure conditions: Confirm whether there is ০.৪ গ্রাম/বর্গসেন্টিমিটার (please confirm the unit) air pressure.

8. Installation space: Confirm whether 2000×1000×2050mm can be placed.

9. Machine weight: Confirm whether ১০০০ কেজি requires consideration for handling and load-bearing.

10. After-sales support: Confirm whether the manufacturer provides installation guidance, operation training and after-sales service.

Q15: What should I consider when buying the CM-12T?

A15: Buyers should consider the following factors:

1. Total power and refrigeration power: Confirm whether ২২.৭ কিলোওয়াট and ১.৫ কিলোওয়াট meet production needs.

2. Voltage: Whether ৩৮০ভি/৫০হার্টজ/৩ফেজ meets local power conditions.

3. বায়ু চাপ: Whether ০.৪ গ্রাম/বর্গসেন্টিমিটার (please confirm the unit) meets production needs.

4. Temperature range: Whether 0–350℃ meets process requirements.

5. Mould size: Whether 400×600mm meets processable material area requirements.

6. Pressure: Whether ১২টি/১৮টি meets pressing firmness requirements.

7. Machine size: Whether 2000×1000×2050mm fits the installation space.

8. Machine weight: Whether ১০০০ কেজি requires consideration for handling and load-bearing.

9. ছাঁচ: Confirm whether customized molds are needed.

10. Spare parts availability: Confirm supply of heating tube, temperature controller, slider and other consumables.

11. After-sales support: Confirm installation guidance, operation training and after-sales service.

12. Delivery time and warranty period: Confirm delivery time and warranty policy.

Q16: Can the CM-12T be customized?

A16: Customization can be confirmed with the manufacturer according to actual requirements. Possible customization directions include:

1. Working voltage

2. Power interface

3. Mould size

4. Pressure range

5. Temperature range

6. Appearance color

Before customization, clarify production needs, material types, mould size requirements, pressure requirements and installation space so the manufacturer can provide a suitable solution.

六.After-sales & Technical Support

Q17: Does the manufacturer provide installation and technical support?

A17:The manufacturer can provide the following services:

1. Installation guidance

2. Commissioning support

3. Operation training

4. বিক্রয়োত্তর সেবা

5. Spare parts supply

6. Mold customization

Specific service scope depends on order and region. Please confirm with the supplier before purchase. It is recommended to clarify installation, training, warranty and spare parts supply in the purchase contract.

七.Safety & Performance

八. Model Selection Consultation

Q17:  What key conditions should be confirmed when purchasing the ASFROM AFL-8832A Rubber Buffing Machine?

A17:Purchasing requires confirmation of 4 core dimensions:

1. Power supply conditions: Confirm the factory site voltage (standard 380V/50Hz three-phase) and frequency. The machine has a total power of 5.5KW (main motor 4KW + dust collector 1.5KW), so ensure the factory power supply lines meet the load requirements；

2. Processing materials and process requirements: Confirm the main material types (rubber/EVA/foam) and surface types (flat/concave-convex). The AFL-8832A is particularly suitable for roughing complex surfaces such as concave and convex surfaces；

3. Roughing depth requirements: Confirm the required roughing depth range. The machine is equipped with an adjustable lifting system for quick roughing depth (thickness) adjustment；

4. Daily output requirements: The AFL-8832A is an automatic feeding machine. Assess whether it matches daily output targets. Compared to manual feeding machines, automatic feeding can significantly improve output per unit time.

Q18: Can the high wear-resistant diamond wheel of the AFL-8832A be replaced by the user after the machine is delivered?

A18:Yes. The diamond wheel is a consumable item that users can replace themselves. Details are as follows:

1. Replacement steps:

   • Turn off the power and wait for the machine to come to a complete stop；

   • Remove the fixing device of the old diamond wheel and take it off；

   • Clean the mounting shaft and mounting surface；

   • Install the new diamond wheel, ensuring proper positioning；

   • Tighten the fixing device and manually rotate to check whether the installation is secure and rotation is smooth；

   • Start the machine for a trial run to confirm normal roughing performance；

2. Procurement channel: It is recommended to purchase genuine imported high wear-resistant diamond wheel parts from the original factory to ensure material and size compatibility；

3. Replacement cycle: The service life of the diamond wheel depends on factors such as material hardness and daily output. Regularly check for wear and replace promptly；

4. Professional advice: For first-time replacement or if unfamiliar with the operation, consult the brand‘s technical support for guidance.