ASFROM Shoe Heel Back Part Forming Machine FAQ
ASFROM Shoe Heel Back Part Forming Machine FAQ
Shoe Heel Back Part Forming Machine Base Q&A
一．Application & Output FAQs
Q1: What materials and shoe styles can this 6-cold heel shaping machine process?
A1: It adapts to all kinds of shoe upper materials, and delivers optimal shaping effect for hot melt adhesive heel counters of sports shoes, casual shoes, men’s and women’s shoes.
Q2: What is the daily production capacity of ACH-720-6C?
A2: Equipped with six independent cold forming stations, the stable output reaches 2500 pairs per 8-hour shift, which is higher than 2-station and 4-station cold models, suitable for mass production shoe factories.
二. Integrated Airbag Cold Mold FAQs
Q3: What is the advantage of the integrated airbag cold outer mold?
A3:The outer frame adopts one-piece airbag structure:
- Only cold inner molds need replacement when switching shoe styles, no need to customize new outer molds, cutting mold development and replacement time cost;
- Omni-directional air wrapping pressure fits heel radian fully without hard mold indentation, uniform shaping without wrinkling or partial incomplete forming.
三. Multi-Directional Claw Adjustment System FAQs
Q4: What adjustment functions do the clamping jaws support?
A4:Independent full-range multi-directional claw adjustment structure. Operators adjust clamping position and tension up, down, left, right, front and back according to different heel sizes and radian, making uppers tightly attach to shoe lasts and eliminate edge fold defects.
Q5: What material are the whole set of adjustable fixtures made of?
A5:All clamps and adjustment parts adopt stainless steel + aluminum alloy composite material, sturdy, rust-proof and wear-resistant for long continuous workshop operation.
四.-15℃ Rapid Refrigeration System FAQs
Q6: What refrigeration configuration does this machine use?
A6:Matched with imported energy-saving eco compressor and environmental refrigerant:
- Fast cooling speed, quickly reach stable -15°C cold mold temperature;
- Even cold distribution across the whole heel surface, stable operation under long-shift mass production with low noise and low power consumption.
五.30° Adjustable Cold Mold FAQs
Q7: Why design adjustable tilt angle for cold mold base?
A7:The cold mold can be tilted freely based on shoe last shape or operator’s working habit. It is easier to load and unload shoe uppers, and effectively prevents uppers from sliding during cold pressing, especially for high-heel and boot lasts.
六.PLC Touch Screen Control FAQs
Q8: Can each station set parameters separately?
A8:Yes. PLC touch screen centralized control allows independent setting of cold mold temperature, holding time and function switches for each station, which can be adjusted flexibly for leather, fabric and hot melt materials.
七.Three-Axis Red LED Positioning Lamp FAQs
Q9: What’s the function of three-axis energy-saving red positioning lamp?
A9: It supports wide-angle adjustment with real-time sensor monitoring, accurately locks heel placement position, avoids shaping deviation caused by manual misplacing uppers, and guarantees consistent finished heel appearance.
八. Complete Technical Parameter FAQs
Q10: What are the full standard specifications of ACH-720-6C?
A10:
- Model: ACH-720-6C Six Cold Back Part Molding Machine
- Power supply: Single Phase AC220V / 50Hz
- Total power: 1.5Kw
- 8-hour output: 2500 pairs
- Refrigerator power: 3/8P
- Max working air pressure: 6-8KG
- Machine overall dimension: 18008502050mm
- Export package dimension: 19009502150mm
- Net weight: 810kg; Gross weight: 930kg
九. Operation & Common Fault FAQs
Q11:What’s the matching air compressor requirement for this machine?
A11: Must equip air compressor with output pressure above 6kg/cm², and keep air three-point unit lubricant sufficient.
Q12: Thick frost accumulates on cold molds after standby, how to handle?
A12:Shut down the compressor and wait frost melts naturally; do not restart within 5 minutes after shutdown to avoid compressor liquid hammer damage.
十. Daily Maintenance FAQs
Q13: What regular maintenance items are required?
A13:
- Daily: Wipe residual glue on airbag and mold surface, drain water from air three-point unit, clean refrigeration radiator filter screen;
- Weekly: Add lubricating grease for claw guide rails, inspect air pipeline for air leakage;
- Monthly: Calibrate temperature sensor, check airbag for tiny cracks.
十一. Customization & After-sales FAQs
Q14: Can shoe lasts and cold inner molds be customized according to shoe samples?
A14:Yes. We tailor cold inner molds, Teflon clamps and positioning parts based on customer exclusive shoe heel radian requirements.
Q15:What documents and warranty support are provided?
A15: Complete English operation manual, spare parts list and circuit diagrams are delivered. The machine enjoys 12-month full machine warranty (consumables like airbags excluded), with 24-hour remote video technical support and lifelong cost-price spare parts supply.
